Home > Drones, Quads, Helis and Parts > Electric Motors / ESCs
Sort By:
Page of 1
Savox BSM5065 Brushless Outrunner RC Helicopter Motor 530KV 700 Class Pro SAVBSM5065P530

This is the Savox BSM5065, 530kV Pro Spec Brushless Outrunner Motor, and is intended for use with 700 class helicopters. The Savox BSM5065 700 class brushless outrunner motor keeps your RC helicopter flying high while cooling itself down. The machined aluminum housing with 6 angled cooling ports and an internal cooling fan allow Savox out runner motors to pump air through the motor, giving you a 10% drop in temperature over other popular brands. Agile and fast, Savox brushless motors facilitate sharp moves in your flying experience.

Features:

  • Unique cooling system design patented by Savox.
  • Hand wound stator to ensure consistent winding.
  • Durable black Electro-Coat finish on the flux ring.
  • High-tech laser etched logos and item numbers to better maintain balance of the motor. No stickers or decals throwing off your tick-tock!
  • Top quality stator plates are epoxy coated on the inner surface to prevent winding shorts. The stator plates are .020mm in diameter.
  • Premium shielded ball bearings are used to support the shaft in all motors.
  • Superior temperature range - 180 C (356 F) rated wire is used to help prevent burning up the motor in long pattern flights.
  • Adhesives designed to withstand high temperatures are used to secure the stator windings and prevent them from shifting, pinching, or shorting out.

Specifications:
Rated Voltage: 44.4 V
Voltage Range: 3-12 S
No-load current: 4.9 Amps
Max. Continuous Power: 4200 Watts
Max. Continuous Current: 95 Amps
Terminal Resistance: 13mΩ
Motor kV (No Load): 530 KV
Pole: 10 P
Slot: 12 N
Motor Weight: 454g
Dimensions: 50mm wide x 65mm tall

Our Price: $210.95
(Out of Stock)
Savox BSM5065 Brushless Outrunner RC Helicopter Motor 450KV 700 Class Pro SAVBSM5065P450

This is the Savox BSM5065, 450kV Pro Spec Brushless Outrunner Motor, and is intended for use with 700 class helicopters. The Savox BSM5065 700 class brushless outrunner motor keeps your RC helicopter flying high while cooling itself down. The machined aluminum housing with 6 angled cooling ports and an internal cooling fan allow Savox out runner motors to pump air through the motor, giving you a 10% drop in temperature over other popular brands. Agile and fast, Savox brushless motors facilitate sharp moves in your flying experience.

Features:

  • Unique cooling system design patented by Savox.
  • Hand wound stator to ensure consistent winding.
  • Durable black Electro-Coat finish on the flux ring.
  • High-tech laser etched logos and item numbers to better maintain balance of the motor. No stickers or decals throwing off your tick-tock!
  • Top quality stator plates are epoxy coated on the inner surface to prevent winding shorts. The stator plates are .020mm in diameter.
  • Premium shielded ball bearings are used to support the shaft in all motors.
  • Superior temperature range - 180 C (356 F) rated wire is used to help prevent burning up the motor in long pattern flights.
  • Adhesives designed to withstand high temperatures are used to secure the stator windings and prevent them from shifting, pinching, or shorting out.

Specifications:
Rated Voltage: 44.4 V
Voltage Range: 3-12 S
No-load current: 3.3 Amps
Max. Continuous Power: 4200 Watts
Max. Continuous Current: 97 Amps
Terminal Resistance: 21mΩ
Motor kV (No Load): 450 kV
Pole: 10 P
Slot: 12 N
Motor Weight: 454g
Dimensions: 50mm wide x 65mm tall

Our Price: $210.95
2 in stock!
Savox BSM5765 Pro Spec 700 Class Brushless Outrunner RC Helicopter Motor 550KV SAVBSM5765P550

The Savox BSM5765 550KV 700 class Brushless Outrunner Motor keeps your RC helicopter flying high while cooling itself down. The machined aluminum housing with 6 angled cooling ports and an internal cooling fan allow Savox out runner motors to pump air through the motor, giving you a 10% drop in temperature over other popular brands. Agile and fast, the brushless motors facilitate sharp moves in your flying experience.

Features:

  • Unique cooling system design patented by Savox.
  • Hand wound stator to ensure consistent winding.
  • Durable black Electro-Coat finish on the flux ring.
  • High-tech laser etched logos and item numbers to better maintain balance of the motor. No stickers or decals throwing off your tick-tock!
  • Top quality stator plates are epoxy coated on the inner surface to prevent winding shorts.
  • Premium shielded ball bearings are used to support the shaft in all motors.
  • Superior temperature range - 180 C (356 F) rated wire is used to help prevent burning up the motor in long pattern flights.
  • Adhesives designed to withstand high temperatures are used to secure the stator windings and prevent them from shifting, pinching, or shorting out.

    Specifications:
  • Weight = 635g.
  • Dimensions: 57mm wide x 65mm tall.
  • Rated Voltage 44.4 V
  • Voltage Range 3-12 S
  • Max. Continuous Power 4400 Watts
  • Motor KV (No Load) 550 KV
  • Our Price: $199.95
    (Out of Stock)
    Savox BSM6364 Pro Spec 800 Class RC Helicopter Brushless Motor 380KV 63*64MM SAVBSM6364P380

    Savox BSM6364 Pro Spec 800 Class RC Helicopter Brushless Motor 380KV 63*64MM SAVBSM6364P380

    Our Price: $196.95
    (Out of Stock)
    Savox BSM5055 Brushless Outrunner RC Helicopter Motor 550KV 600 Class Pro SAVBSM5055P550

    This is the Savox BSM5055, 550kV Pro Spec Brushless Outrunner Motor, and is intended for use with 600 class helicopters. The Savox BSM5055 600 class brushless outrunner motor keeps your RC helicopter flying high while cooling itself down. The machined aluminum housing with 6 angled cooling ports and an internal cooling fan allow Savox out runner motors to pump air through the motor, giving you a 10% drop in temperature over other popular brands. Agile and fast, Savox brushless motors facilitate sharp moves in your flying experience.

    Features:

    • Unique cooling system design patented by Savox.
    • Hand wound stator to ensure consistent winding.
    • Durable black Electro-Coat finish on the flux ring.
    • High-tech laser etched logos and item numbers to better maintain balance of the motor. No stickers or decals throwing off your tick-tock!
    • Top quality stator plates are epoxy coated on the inner surface to prevent winding shorts. The stator plates are .020mm in diameter.
    • Premium shielded ball bearings are used to support the shaft in all motors.
    • Superior temperature range - 180 C (356 F) rated wire is used to help prevent burning up the motor in long pattern flights.
    • Adhesives designed to withstand high temperatures are used to secure the stator windings and prevent them from shifting, pinching, or shorting out.

    Specifications:
    Rated Voltage: 44.4 V
    Voltage Range: 3-12 S
    No-load current: 3.3 Amps
    Max. Continuous Power: 4000 Watts
    Max. Continuous Current: 95 Amps
    Terminal Resistance: 18mΩ
    Motor kV (No Load): 550 kV
    Pole: 10 P
    Slot: 12 N
    Motor Weight: 363g
    Dimensions: 50mm wide x 55mm tall

    Our Price: $189.95
    3 in stock!
    Savox BSM4760 Brushless Outrunner RC Helicopter Motor 1200KV 600 Class Pro SAVBSM4760P1200

    This is the Savox BSM4760, 1200kV Pro Spec Brushless Outrunner Motor, and is intended for use with 600 class helicopters. The Savox BSM4760 600 class brushless outrunner motor keeps your RC helicopter flying high while cooling itself down. The machined aluminum housing with 6 angled cooling ports and an internal cooling fan allow Savox out runner motors to pump air through the motor, giving you a 10% drop in temperature over other popular brands. Agile and fast, Savox brushless motors facilitate sharp moves in your flying experience.

    Features:

    • Unique cooling system design patented by Savox.
    • Hand wound stator to ensure consistent winding.
    • Durable black Electro-Coat finish on the flux ring.
    • High-tech laser etched logos and item numbers to better maintain balance of the motor. No stickers or decals throwing off your tick-tock!
    • Top quality stator plates are epoxy coated on the inner surface to prevent winding shorts. The stator plates are .020mm in diameter.
    • Premium shielded ball bearings are used to support the shaft in all motors.
    • Superior temperature range - 180 C (356 F) rated wire is used to help prevent burning up the motor in long pattern flights.
    • Adhesives designed to withstand high temperatures are used to secure the stator windings and prevent them from shifting, pinching, or shorting out.

    Specifications:
    Rated Voltage: 22.2 V
    Voltage Range: 3-6 S
    No-load current: 9.1 Amps
    Max. Continuous Power: 2780 Watts
    Max. Continuous Current: 134 Amps
    Terminal Resistance: 9mΩ
    Motor kV (No Load): 1200 kV
    Pole: 10 P
    Slot: 12 N
    Motor Weight: 358g
    Dimensions: 47mm wide x 60mm tall

    Our Price: $179.95
    (Out of Stock)
    Savox BSM4050 Brushless Outrunner RC Helicopter Motor 1300KV 500 Class Pro SAVBSM4050P1300

    Savox BSM4050 Brushless Outrunner RC Helicopter Motor 1300KV 500 Class Pro SAVBSM4050P1300

    Our Price: $175.99
    (Out of Stock)
    Savox BSM5065 Brushless Outrunner RC Helicopter Motor 500KV 700 Class Pro SAVBSM5065P500

    This is the Savox BSM5065, 500kV Pro Spec Brushless Outrunner Motor, and is intended for use with 700 class helicopters. The Savox BSM5065 700 class brushless outrunner motor keeps your RC helicopter flying high while cooling itself down. The machined aluminum housing with 6 angled cooling ports and an internal cooling fan allow Savox out runner motors to pump air through the motor, giving you a 10% drop in temperature over other popular brands. Agile and fast, Savox brushless motors facilitate sharp moves in your flying experience.

    Features:

    • Unique cooling system design patented by Savox.
    • Hand wound stator to ensure consistent winding.
    • Durable black Electro-Coat finish on the flux ring.
    • High-tech laser etched logos and item numbers to better maintain balance of the motor. No stickers or decals throwing off your tick-tock!
    • Top quality stator plates are epoxy coated on the inner surface to prevent winding shorts. The stator plates are .020mm in diameter.
    • Premium shielded ball bearings are used to support the shaft in all motors.
    • Superior temperature range - 180 C (356 F) rated wire is used to help prevent burning up the motor in long pattern flights.
    • Adhesives designed to withstand high temperatures are used to secure the stator windings and prevent them from shifting, pinching, or shorting out.

    Specifications:
    Rated Voltage: 44.4 V
    Voltage Range: 3-12 S
    No-load current: 4.1 Amps
    Max. Continuous Power: 4400 Watts
    Max. Continuous Current: 100 Amps
    Terminal Resistance: 18mΩ
    Motor kV (No Load): 500 kV
    Pole: 10 P
    Slot: 12 N
    Motor Weight: 454g
    Dimensions: 50mm wide x 65mm tall

    Our Price: $169.95
    (Out of Stock)
    Savox BSM4050 Brushless Outrunner RC Helicopter Motor 1200KV 500 Class Pro SAVBSM4050P1200

    Savox BSM4050 Brushless Outrunner RC Helicopter Motor 1200KV 500 Class Pro SAVBSM4050P1200

    Our Price: $158.99
    2 in stock!
    Castle Creations Phoenix Edge 100 32V 100-Amp ESC w/5-Amp BEC

    This is the Castle Creations Phoenix Edge 100 32V 100-Amp ESC. The next evolution in speed controller technology has arrived With the debut of the Phoenix Edge series ESC's. The Edge series features a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an “unexpected landing”, act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility.

    The Phoenix Edge 100 is intended for use in 500 and 550 class helicopters, as well as .40 - .90 fixed wing aircraft. Additionally, this ESC is also compatible with 600 class helicopters when used with an external BEC or receiver pack. As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter.

    Programmability
    Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software. Castle Field Link Programming Card (sold separately) compatible for select functions.

    Same Incredible Price

    The Phoenix Edge controllers deliver all of this while retaining the same astonishing prices as their predecessors.

    White Auxiliary Wire
    The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an “unexpected landing”, act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock or as a receiver arming lock.

    Phoenix Edge 100 Specs:

    • Applications:
      • Helis: 500, 550 & 600 (600 class use external BEC or RX/servo power source; not included)
      • Fixed wing: .40-.90
    • Technical Specs:
      • Input voltage: MIN: 2S LiPo MAX: 8S LiPo
      • Max continuous amperage at full throttle: 100 amps*
      • BEC Voltage: 5 to 8.4V output
      • BEC Output Amperage: 5 Amp peak**
    • Size and Weight:
      • Width: 2.0" (50.8mm)
      • Length: 2.8" (71.9mm)
      • Height: 0.9" (23.2mm)
      • Weight w/wires: 4.5 oz (126.6g)
      • Weight w/o wires: 2.6 oz (72.9g)
    • Connectors: Battery and motor connectors sold separately
    • Tools needed for installation: Soldering iron and solder to attach bullets to motor wires and battery connector to power wires.

    *NOTE: RC HOBBY APPLICATION RATING: 100 amps for the duration of a single 5,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25°C (77°F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.

    **NOTE: Peak indicates amperage sustainable for 0.5 seconds – long enough for most servos’ current draw transients. Your setup may vary. Always confirm servo current draw before the first flight of the model.

    Our Price: $124.95
    (Out of Stock)
    Savox BSM4750 Brushless Outrunner RC Helicopter Motor 1200KV 550 Class Pro SAVBSM4750P1200

    This is the Savox BSM4750, 1200kV Pro Spec Brushless Outrunner Motor, and is intended for use with 550 class helicopters. The Savox BSM4750 550 class brushless outrunner motor keeps your RC helicopter flying high while cooling itself down. The machined aluminum housing with 6 angled cooling ports and an internal cooling fan allow Savox out runner motors to pump air through the motor, giving you a 10% drop in temperature over other popular brands. Agile and fast, Savox brushless motors facilitate sharp moves in your flying experience.

    Features:

    • Unique cooling system design patented by Savox.
    • Hand wound stator to ensure consistent winding.
    • Durable black Electro-Coat finish on the flux ring.
    • High-tech laser etched logos and item numbers to better maintain balance of the motor. No stickers or decals throwing off your tick-tock!
    • Top quality stator plates are epoxy coated on the inner surface to prevent winding shorts. The stator plates are .020mm in diameter.
    • Premium shielded ball bearings are used to support the shaft in all motors.
    • Superior temperature range - 180 C (356 F) rated wire is used to help prevent burning up the motor in long pattern flights.
    • Adhesives designed to withstand high temperatures are used to secure the stator windings and prevent them from shifting, pinching, or shorting out.

    Specifications:
    Rated Voltage: 22.2 V
    Voltage Range: 3-6 S
    No-load current: 6.7 Amps
    Max. Continuous Power: 2200 Watts
    Max. Continuous Current: 104 Amps
    Terminal Resistance: 16mΩ
    Motor kV (No Load): 1200 kV
    Pole: 10 P
    Slot: 12 N
    Motor Weight: 270g
    Dimensions: 47mm wide x 50mm tall

    Our Price: $116.95
    (Out of Stock)
    Savox BSM3750 Brushless Outrunner RC Helicopter Motor 1300KV 500 Class Pro SAVBSM3750P1300

    This is the Savox BSM3750, 1300kV Pro Spec Brushless Outrunner Motor, and is intended for use with 500 class helicopters. The Savox BSM3750 500 class brushless outrunner motor keeps your RC helicopter flying high while cooling itself down. The machined aluminum housing with 6 angled cooling ports and an internal cooling fan allow Savox out runner motors to pump air through the motor, giving you a 10% drop in temperature over other popular brands. Agile and fast, Savox brushless motors facilitate sharp moves in your flying experience.

    Features:

    • Unique cooling system design patented by Savox.
    • Hand wound stator to ensure consistent winding.
    • Durable black Electro-Coat finish on the flux ring.
    • High-tech laser etched logos and item numbers to better maintain balance of the motor. No stickers or decals throwing off your tick-tock!
    • Top quality stator plates are epoxy coated on the inner surface to prevent winding shorts. The stator plates are .020mm in diameter.
    • Premium shielded ball bearings are used to support the shaft in all motors.
    • Superior temperature range - 180 C (356 F) rated wire is used to help prevent burning up the motor in long pattern flights.
    • Adhesives designed to withstand high temperatures are used to secure the stator windings and prevent them from shifting, pinching, or shorting out.

    Specifications:
    Rated Voltage: 22.2 V
    Voltage Range: 3-6 S
    No-load current: 7.2 Amps
    Max. Continuous Power: 2100 Watts
    Max. Continuous Current: 99 Amps
    Terminal Resistance: 19mΩ
    Motor kV (No Load): 1300 KV
    Pole: 10 P
    Slot: 12 N
    Motor Weight: 184g
    Dimensions: 37mm wide x 50mm tall

    Our Price: $107.95
    (Out of Stock)
    Castle Creations 010-0113-00 Phoenix Edge Lite 50 25V 50-Amp BL ESC w/5-Amp BEC

    This is the Castle Creations Phoenix Edge Lite 50 Brushless ESC. Put your power system on a diet with the Phoenix Edge Lite series of ESCs. With the same amazing features and functionality of the Edge series, the Edge Lite offers a slight weight reduction for applications that are tight for space or weight. Simply put, the same brawn with less body - Phoenix Edge Lite.

    With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an “unexpected landing”, act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility.

    The Phoenix Edge series is intended for use in helicopters and fixed wing aircraft. As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter (free with included coupon).

    Same Incredible Price

    The Phoenix Edge controllers deliver all of this at the same astonishing prices as the previous model.

    Specifications:
    Application: Helis & Fixed wing
    Input voltage: MIN: 2S LiPo MAX: 8S LiPo
    Max continuous amperage at full throttle: 50 amps*
    BEC voltage (voltage regulator for powering radio and sevos): User selectable choice from 5 to 8.4 volt output
    BEC output amperage: 5 amp peak**
    Width: 1.0" (25.4mm)
    Length: 2.0" (50.8mm)
    Height: 0.9" (23.2mm)
    Weight w/wires: 2.0 oz (56g)
    Weight w/o wires: 1.0 oz (28g)
    Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software. Castle Field Link Programming Card (sold separately) compatible for select functions.
    Connectors: Battery and motor connectors sold separately
    Tools needed for installation: Soldering iron and solder to attach bullets to motor wires and battery connector to power wires.

    NOTE:

    • *RC HOBBY APPLICATION RATING: 50 amps with appropriate cooling. Phoenix Edge Lite controllers are designed without a heat-sink for applications with extreme air-flow, such as EDF planes, or applications with average current requirements much less than peak current requirements. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.
    • **Peak indicates amperage sustainable for 0.5 seconds – long enough for most servos’ current draw transients. Your setup may vary. Always confirm servo current draw before the first flight of the model.

    Our Price: $99.95
    (Out of Stock)
    Savox BSM3750 Brushless Outrunner RC Helicopter Motor 1200KV Pro Spec 500 Class SAVBSM3750P1200

    Savox BSM3750 Brushless Outrunner RC Helicopter Motor 1200KV Pro Spec 500 Class SAVBSM3750P1200

    Our Price: $99.95
    1 in stock!
    Savox BSM2940 Brushless Outrunner RC Helicopter Motor 3500KV 450 Class SAVBSM2940M3500

    The Savox BSM2940 3500KV 450 class Brushless Outrunner Motor keeps your RC helicopter flying high while cooling itself down. The machined aluminum housing with 6 angled cooling ports and an internal cooling fan allow Savox out runner motors to pump air through the motor, giving you a 10% drop in temperature over other popular brands. Agile and fast, the brushless motors facilitate sharp moves in your flying experience. Weight = 71g.

    Features:

    • Unique cooling system design patented by Savox.
    • Precision wound with machine accuracy.
    • Durable black Electro-Coat finish on the flux ring.
    • High-tech laser etched logos and item numbers to better maintain balance of the motor. No stickers or decals throwing off your tick-tock!
    • Top quality stator plates are epoxy coated on the inner surface to prevent winding shorts. The stator plates are .020mm in diameter.
    • Premium shielded ball bearings are used to support the shaft in all motors.
    • Superior temperature range - 180 C (356 F) rated wire is used to help prevent burning up the motor in long pattern flights.
    • Adhesives designed to withstand high temperatures are used to secure the stator windings and prevent them from shifting, pinching, or shorting out.

    Specifications:
    Rated Voltage11.1 Volts
    Voltage Range2-4s LiPo
    No-load Current2.7 Amps
    Maximum Continuous Power538 Watts
    Maximum Continuous Current 51 Amps
    Terminal Resistance0.019 Ohms
    Motor kV (no load)3500kV
    Pole10 Pole
    Slot12 N
    Weight71g




    Our Price: $81.00
    (Out of Stock)
    Castle Creations Talon 90 Brushless ESC CSE010-0097-00

    This is the Castle Creations Talon 90 Brushless ESC. Castle’s Talon 90 ESC sports a BEC designed for today’s servos, pumping out up to 20 amps peak power and 9 amps of continuous power to keep even the hungriest servos happy.

    Designed for Helis

    Talon 90 is ideal for helicopters drawing 2,000 watts on 6S. It’s a great fit for extreme 500 and 550 class helis and sport (6S) 600 setups. Of course, Talon offers Castle's industry-leading helicopter functions, such as the unbelievable direct entry governor mode. Simply type in the desired RPM using a Castle Link USB Adapter (coupon for free Castle Link adapter included in package) and the free Castle Link GUI running on a Windows PC!

    Great for Fixed Wing
    The Talon 90 is perfect for aerobats up to 10 pounds and scale ships up to 20 pounds. The innovative case ensures cooling in even the toughest mounting locations.

    Unbelievable Pricing
    Castle Talon delivers premium performance and features at an amazing price.

    Specifications:

    • Input Voltage:
      • MIN: 3S LiPo
      • MAX: 6S LiPo
    • Max continuous amperage at full throttle: 90 amps (rating determined with 5mph airflow across the ESC)
    • BEC voltage (voltage regulator for powering radio and servos): User selectable choice of 6 or 8 volt output
    • BEC output:
      • 20 amp peak*
      • 9 amp continuous
    • Dimensions:
      • Width: 1.7" (43mm)
      • Length: 3.14" (80mm)
      • Depth: 0.7" (18mm)
      • Mounting Bracket: Adds 2mm depth and 8mm width
    • Weight: 3.0 oz. (84.5g) with 150mm power wires and no battery connectors
    • Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link adapter included in package) and freely downloadable Castle Link Windows software.
    • Items needed for operation or installation:
      • Battery connector (sold separately)
      • Female motor bullets are built into the ESC
      • Matching male bullets are included

    Our Price: $71.95
    3 in stock!
    Savox 450 Class Helicopter Brushless Motor 1900KV 33*40MM SAVBSM3340P1900

    Brushless Outer Runner Motor
    BSM-3340(1900KV)


    Dimension: 33.0mm *39.70mm
    Shaft size: 3.5mm *60.00mm
    Weight 116.0g
    Max. current 55A
    Max: power 1,220w

    Our Price: $70.00
    (Out of Stock)
    Hobbywing 30901007 Xrotor 50A LED Multirotor Electronic Speed Control ESC

    Hobbywing 30901007 XROTOR-50A LED MULTIROTOR ESC

    Our Price: $49.99
    6 in stock!
    Hobbywing 30405109 XRotor Drone Performance Brushless Motor 2300KV 2205-CCW-V1

    Hobbywing 30405109 XRotor Performance Motor 2300KV, 2205-CCW-V1

    Our Price: $19.99
    7 in stock!
    Hobbywing 30405108 XRotor Drone Performance Brushless Motor 2300KV 2205-CW-V1

    Hobbywing 30405108 XRotor Performance Motor 2300KV, 2205-CW-V1

    Our Price: $19.99
    7 in stock!
    Hobbywing 30901070 XRotor 35A 3-6S Micro Brushless ESC for Drone Racing

    Hobbywing 30901070 XRotor-35A-Micro 3-6S-BLHeli

    Our Price: $18.95
    9 in stock!
    Hobbywing 30901001 XRotor 40A V1 Multirotor Esc / Speed Control : 500/650 Class Quads

    Hobbywing 30901001 Xrotor-40A Multirotor ESC

    Our Price: $18.95
    7 in stock!
    Hobbywing 30901005 Xrotor 20A Multirotor Electronic Speed Control ESC

    Hobbywing 30901005 Xrotor-20A Multirotor ESC

    Our Price: $15.95
    8 in stock!
    Hobbywing 30901008 Xrotor 10A Multirotor Mini Electronic Speed Control ESC

    Hobbywing 30901008 Xrotor 10A Mini ESC -COB

    Our Price: $13.95
    4 in stock!
    Hobbywing 30901003 Xrotor 10A Multirotor Electronic Speed Control ESC

    Hobbywing 30901003 Xrotor-10A Multirotor ESC

    Our Price: $13.95
    8 in stock!
    Hobbywing 86030000 4 Capacitors Module For Xerun Series Car ESC

    4 Capacitors Module for Xerun Series Car ESC

    Our Price: $9.99
    10 in stock!
    Hobbywing 86080080 Fan MP3010SH-5V 10000RPM@5V BK B

    Hobbywing 86080080 Fan MP3010SH-5V 10000RPM@5V BK B

    Our Price: $8.99
    5 in stock!
    Hobbywing 86080050 Fan 2510SH-5V 10000RPM@5V BK F

    Hobbywing 86080050 Fan 2510SH-5V 10000RPM@5V BK F

    Our Price: $8.99
    10 in stock!
    Hobbywing 86030030 2 Capacitors Module For Xerun Series Car ESC

    2 Capacitors Module for Xerun Series Car ESC

    Our Price: $7.49
    10 in stock!